250kg flake ice machine with 130kg slope fronted ice bin

The Ziegra ZBE250-S130 ice machine makes up to 250kg of flake ice in one of two sizes. It sits on an S130 slope fronted ice storage bin, which stores 130kg of ice ready for use. The ice machine has a B type ice discharge / level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

There are two options to choose from;
ZBE 150-S130 CoolNat with a natural refrigerant for standard environments and applications.
ZBE 150-S130 with R452a refrigerant for applications and environments where more flexibility is required.

ZBE250 main features

Ice level control system included as standard
Granular flake ice made at optimum temperature of -0.5°C.
Two sizes of ice flake available: micro and midi, to suit a wide range of applications
Hygienic design with a sealed water system
External water filtration system supplied as standard.
Designed for continuous operation 24/7
Stainless steel construction
No moving parts in refrigeration circuit lowers risk of gas leaks
Environmentally friendly natural refrigerant

S130 ice storage features

Stainless steel construction
Poly lined interior for easy cleaning and maximum chlorine resistance.
Non CFC insulation

Model	ZBE 250-S130 CoolNat	ZBE 250 RV-S130
250kg/24h nominal capacity*	20°C air + 15°C water
Ice storage capacity	130kg (390 Litres)
Assembled Dimensions (W x D x H)	762 x 807 x 1621mm high
Assembled Weight	145kg
Cabinet	Stainless Steel 1.4301
IP protection class	IP 54
Minimum room volume	18m3	No mimimum
Electricity Power consumption Current consumption	0.8kW 3.6A	1 kW 4.5A
Provided by customer Electric supply Fuse, slow blow Cable cross section, Cu	1/N/PE ~230V 50Hz 13A 1.5mm2
Water connections Supply Drain	¾” BSP male 14mm hose nozzle
Provided by customer Pressure Quality pH value hardness temperature	2-5 bar Mains water 7.2 – 9.5pH 6-14 °dH / 100 – 250mg CaCO3/l 5°C – 25°C
Ambient air temperature range	5°C – 38°C
Condenser Finish Air / water flow Heat emission	Air cooled Standard 800m3 / h 2.0kW	Remote air cooled Weatherproof 830m3 / h 2.1kW
Refrigerant type Refrigerant charge ODP GWP CO2 tonnes equivalent	R290 0.112kg 0 3 0.000336	R452A 1.0kg 0 2,140 2.14
Noise level	51dBA (3m)
Ice discharge	See ‘ice discharge options’
Shipping dimensions (W x D x H)	(0.76 x 0.76 x 0.79m) + (0.8 x 0.9 x 1.0m)
Shipping weight	95kg + 75kg
*according to site conditions. Air temperature, water temperature, water chemistry, air contamination and installation / operating parameters can all effect ice production. All product, specifications and data are subject to change without notice.

C: Water connection: 3/4″ BSP
D: Electrical cable / plug: Standard UK 3 pin
E: Meltwater drain: 14mm
F: Floor drain (by customer)

The ZBE250-S130 ice machine will be delivered according to CE standards and ready for connection to water power and drain.

Includes as standard:

High pressure pressostat
Water supply control
Motor protection for the compressor
B type ice discharge
Ice level control by mechanical switch
1 x connecting cable 3.5m
1 x Flexible 2 metre water supply hose
1 x flexible 2 metre drain hose
1 x PE ice scoop
1 x Ziegra Single water filtration kit

Configuration Options

Castor mounting The bin mounted on castors so the machine can be moved for cleaning. Supplied pre-fitted.

Drain Pump Pumps the drain water into the site drain if it is too high or far away for gravity drainage. Supplied with a 2 metre flex, it can be directly wired into a fused spur or a plug fitted (not supplied) and plugged into a standard 3 pin socket. Mount on the floor underneath the machine. Not suitable for dusty environments.

Condenser options Water cooled instead of air-cooled: where air-cooling is not possible.Useful in applications where the machine must be installed into an area with poor ventilation where a remote aircooled condenser is not possible. Requires change to R452a Water connections: 1/2″ Male Water flow: 110 l/h Heat emission: 2.1kW Remote condenser option: The condenser supplied separately to the machine for remote mounting, typically outside, when the machine is to be located in areas that poorly ventilated or have airbourne contamination such as flour dust. Available as standard for indoor mounting, weatherproof for outside mounting and cu/cu saltwater resistant for mounting in areas close to the sea. Requires change to R452a *Low noise condenser:* Only for remote installation. Use when the condenser will be going in an area sensitive to noise, such as residential.

Frostguard: The machine equipped to deal with intermittent temperatures below 5°C, only available in conjunction with remote condenser option above.

Additional Hygiene Options

Hygiene +: Auto water drain The water tank automatically drains when the machine is switched off, preventing water stagnation during periods of infrequent use.

Hygiene +: UV sterilization Sterilization of the incoming water supply by mean of UV filter, all incoming water is passed through a powerful UV field on its way into the machine which kill almost all biohazards in the water supply. Slows down proliferation of water-borne bacteria inside the machine during operation.

Sanitiser solution: 5litre tub part # ZUK9700044 Ziegra ice machine sanitiser is an anti-bacterial product designed for both regular preventative use and intensive cleaning operations.

Spare filter cartridge: #ZUK9700040 Standard replacement cartridge for the Ziegra single kit, requires change every 6 months.

Ancillary items

7 day timer Allows programming of the machine to make ice at specific times of the day or night.

Smartcart 240 80kg capacity insulated ice cart, moulded from food safe polymer for maximum hygiene. With removeable lid. Ideal when the ice machine and bin must be located away from the point where the ice will be used.

0844 8808055

250kg flake ice machine with 130kg slope fronted bin

ZBE250 main features

S130 ice storage features

Enquire about this Machine now

Rent this Machine

Configuration Options

Additional Hygiene Options

Ancillary items